Capo dalla vestibilità più classica senza rinunciare ad un buon comfort. Consigliato per coloro che portano pettorine durante la guida (si consiglia di prendere taglie maggiorate in tal caso) o a chi pratica Enduro in quanto più resistente rispetto al modello sottostante.
Maggiore libertà di movimento grazie ad una vestibilità ottimale che garantisce una riduzione dello sfregamento e quindi un massimo comfort. Consigliato per coloro che non portano pettorine o per coloro che la portano sopra la maglia. Il tessuto, essendo molto aderente, è consigliato a chi valorizza di più il confort di guida alla resistenza alle cadute.
Cliccando su "STANDARD" potrai personalizzare nome e numero del tuo capo e potrai quindi acquistarlo nella configurazione (colori e loghi) che vedi di presentazione.
Selezionando invece "PERSONALIZZATA", oltre ad inserire nome e numero, potrai anche modificare i colori del prodotto ed inserire fino ad un massimo di tre loghi. I loghi che potranno essere stampati sui nostri completi sono quelli di cui sei proprietario o autorizzato all’uso. In particolare non può essere inserito alcun brand con riferimento ad energy drink e brand di moto.
A classic fit without sacrificing great comfort. Recommended for those who wear guards while driving (it is advisable to take larger sizes in this case) or to those who practice Enduro as it is more resistant than the slim model.
It provides a greater freedom of movement thanks to an optimal fit that guarantees a reduction in friction and therefore maximum comfort. Recommended for those who do not wear any guards or for those who wear them over the shirt. The fabric, being very adherent, is recommended for those who value more the comfort of driving over the resistance to falls.
By selecting "STANDARD" you can customize the name and number of your mx gear and then buy it in the configuration (colors and logos) that you see in the above figure.
By selecting "CUSTOM" instead, in addition to entering the name and number, you can also change the colors of the gear set and insert up to three logos. For the logos you provide us, they must be the ones you own or you are authorized for. In particular, no trademark can be entered with reference to energy drinks and motorcycles
Le grafiche vengono disegnate indicativamente per il modello più recente della marca in questione ma compariranno allo stesso modo su qualsiasi altro modello antecedente.
Il coprisella verrà realizzato come quello montato sulla moto se acquisti il kit grafiche nella versione "STANDARD" oppure verrà personalizzato con i colori che imposterai nell’editor se acquisti la grafica in versione "PERSONALIZZATA"
Cliccando su "STANDARD" potrai personalizzare nome e numero del tuo kit grafiche e potrai quindi acquistarlo nella configurazione (colori e loghi) che vedi di presentazione.
Selezionando "PERSONALIZZATA", oltre ad inserire nome e numero, potrai anche modificare i colori del kit grafiche, scegliere se riceverlo con laminazione lucida oppure opaca ed inserire fino ad un massimo di sette loghi.
Cliccando su "SI" ti assumi la responsabilità che la moto monti esattamente le plastiche che vengono rilasciate al momento della vendita dalla casa madre. Cliccando su "NO", ti assumi la responsabilità che la moto monti le plastiche visibili nelle foto da te allegate qua sotto.
A prescindere dalle casistiche, consigliamo sempre di allegare alcune foto della moto così da essere sicuri che il kit grafiche verrà realizzato esattamente per le plastiche presenti nelle foto allegate.
Materiali standard: I materiali usati nella configurazione Standard sono materiali "Supergrip" tranne nella colorazione Bianca e Arancione in cui viene utilizzato un materiale medio grip.
Colorazione Fluo: Per via del processo chimico di realizzo, il giallo e rosso fluo sono gli unici materiale che in determinate situazioni e condizioni climatiche tendono a diminuire la saturazione del colore. Non esiste attualmente un materiale in commercio che preserva una saturazione identica per tutta la durata del suo utilizzo.
Sul Materiali "Blu Rumble" non è possibile applicare alcun logo colorato, motivo per il quale il nostro logo e quello delle marche viene realizzato in neutro ossia col materiale "Blu Rumble".
Se la sella della vostra moto differisce dal modello raffigurato (doppia punta, buco per le chiavi etc), non vi preoccupate perché ogni sella viene creata su misura in base alla moto scelta e in base alle esigenze
Standard materials: The materials used in the Standard configuration are "Supergrip" materials except for the White and Orange colors in which is used a medium grip material.
Fluo colours: Due to the chemical manufacturing process, the fluo yellow and fluo red are the only materials that in certain situations and climatic conditions tend to decrease color saturation over time. There is currently no material on the market that maintains an identical saturation for the duration of its use.
No colored logo can be applied to the "Blu Rumble" Materials, which is why our logo and that of the brands are made in neutral, i.e. with the "Blu Rumble" material.
If the saddle of your motorcycle differs from the model shown (ex it has a double tip, hole for the keys, etc.), do not worry because each saddle is tailor-made according to the chosen motorcycle and according to the customizations required.
Materiali standard: I materiali usati nella configurazione Standard sono materiali "Supergrip" tranne nella colorazione Bianca e Arancione in cui viene utilizzato un materiale medio grip.
Colorazione Fluo: Per via del processo chimico di realizzo, il giallo e rosso fluo sono gli unici materiale che in determinate situazioni e condizioni climatiche tendono a diminuire la saturazione del colore. Non esiste attualmente un materiale in commercio che preserva una saturazione identica per tutta la durata del suo utilizzo.
Sul Materiali "Blu Rumble" non è possibile applicare alcun logo colorato, motivo per il quale il nostro logo e quello delle marche viene realizzato in neutro ossia col materiale "Blu Rumble".
Se la sella della vostra moto differisce dal modello raffigurato (doppia punta, buco per le chiavi etc), non vi preoccupate perché ogni sella viene creata su misura in base alla moto scelta e in base alle esigenze.
Per HM e Vent, non verrà inserito il logo Honda bensì HM.
Standard materials: The materials used in the Standard configuration are "Supergrip" materials except for the White and Orange colors in which is used a medium grip material.
Fluo colours: Due to the chemical manufacturing process, the fluo yellow and fluo red are the only materials that in certain situations and climatic conditions tend to decrease color saturation over time. There is currently no material on the market that maintains an identical saturation for the duration of its use.
No colored logo can be applied to the "Blu Rumble" Materials, which is why our logo and that of the brands are made in neutral, i.e. with the "Blu Rumble" material.
If the saddle of your motorcycle differs from the model shown (ex it has a double tip, hole for the keys, etc.), do not worry because each saddle is tailor-made according to the chosen motorcycle and according to the customizations required.
For HM and Vent, the Honda logo will not be included but will be collocated the HM one.
Materiali standard: I materiali usati nella configurazione Standard sono materiali "Supergrip" tranne nella colorazione Bianca e Arancione in cui viene utilizzato un materiale medio grip.
Colorazione Fluo: Per via del processo chimico di realizzo, il giallo e rosso fluo sono gli unici materiale che in determinate situazioni e condizioni climatiche tendono a diminuire la saturazione del colore. Non esiste attualmente un materiale in commercio che preserva una saturazione identica per tutta la durata del suo utilizzo.
Sul Materiale "Blu Rumble" non è possibile applicare alcun logo colorato, motivo per il quale il nostro logo e quello delle marche viene realizzato in neutro ossia col materiale "Blu Rumble".
Se la sella della vostra moto differisce dal modello raffigurato (doppia punta, buco per le chiavi etc), non vi preoccupate perché ogni sella viene creata su misura in base alla moto scelta e in base alle esigenze.
I coprisella Standard per Husqvarna verrano realizzati con il nostro materiale "Blu Rumble". Abbiamo preso questa scelta per far sì che i colori si abbinino nel migliore dei modi al colore originale della moto.
Standard materials: The materials used in the Standard configuration are "Supergrip" materials except for the White and Orange colors in which is used a medium grip material.
Fluo colours: Due to the chemical manufacturing process, the fluo yellow and fluo red are the only materials that in certain situations and climatic conditions tend to decrease color saturation over time. There is currently no material on the market that maintains an identical saturation for the duration of its use.
No colored logo can be applied to the "Blu Rumble" Materials, which is why our logo and that of the brands are made in neutral, i.e. with the "Blu Rumble" material.
If the saddle of your motorcycle differs from the model shown (ex it has a double tip, hole for the keys, etc.), do not worry because each saddle is tailor-made according to the chosen motorcycle and according to the customizations required.
The Standard seat covers for Husqvarna will be made with our “Blu Rumble” material. We made this choice to ensure that the colors match the original color of the bike in the best possible way.
Materiali standard: I materiali usati nella configurazione Standard sono materiali "Supergrip" tranne nella colorazione Bianca e Arancione in cui viene utilizzato un materiale medio grip.
Colorazione Fluo: Per via del processo chimico di realizzo, il giallo e rosso fluo sono gli unici materiale che in determinate situazioni e condizioni climatiche tendono a diminuire la saturazione del colore. Non esiste attualmente un materiale in commercio che preserva una saturazione identica per tutta la durata del suo utilizzo.
Sul Materiale "Blu Rumble" non è possibile applicare alcun logo colorato, motivo per il quale il nostro logo e quello delle marche viene realizzato in neutro ossia col materiale "Blu Rumble".
Se la sella della vostra moto differisce dal modello raffigurato (doppia punta, buco per le chiavi etc), non vi preoccupate perché ogni sella viene creata su misura in base alla moto scelta e in base alle esigenze.
I coprisella Standard per TM verranno realizzati in differenti materiali e quindi colorazioni in base al modello: per tutti i modelli Motard inseriremo un materiale con una tonalità uguale all’originale ed un grip inferiore mentre
per tutti i modelli Enduro e Motocross verrà inserito un Blu con una tonalità che si discosta leggermente da quella originale ma con un materiale con maggiore grip.
Standard materials: The materials used in the Standard configuration are "Supergrip" materials except for the White and Orange colors in which is used a medium grip material.
Fluo colours: Due to the chemical manufacturing process, the fluo yellow and fluo red are the only materials that in certain situations and climatic conditions tend to decrease color saturation over time. There is currently no material on the market that maintains an identical saturation for the duration of its use.
No colored logo can be applied to the "Blu Rumble" Materials, which is why our logo and that of the brands are made in neutral, i.e. with the "Blu Rumble" material.
If the saddle of your motorcycle differs from the model shown (ex it has a double tip, hole for the keys, etc.), do not worry because each saddle is tailor-made according to the chosen motorcycle and according to the customizations required.
The Standard seat covers for TM will be made in different materials and therefore colors based on the model: for all Motard models we will insert a material with a shade equal to the original but with a lower grip while for all Enduro and Motocross models we will insert a Blue with a shade that differs slightly from the original one but with a material with greater grip.
Opteremo noi la miglior posizione in cui collocarli (ti verrà fornita un’anteprima prima della stampa) e il kit grafiche verrà elaborato solamente in seguito alla tua approvazione.
Se hai qualche particolare preferenza per la posizione dei loghi, scrivile nelle note dell'ordine che troverai al checkout ossia la pagina in cui selezionerai metodo di pagamento e spedizione
The graphics are designed indicatively for the most recent model of the brand picked, but they will appear in the same way on any other previous model.
The seat cover will be made like the one mounted on the bike shown if you buy the graphics kit in the "STANDARD" version or it will be customized with the colors you set in the editor if you buy the graphics in the "CUSTOM" version.
By clicking on "STANDARD" you can customize the name and number of your graphic kit and you can then purchase the kit in the configuration (colors and logos) you see presented.
By selecting "CUSTOMIZED", in addition to entering the name and number, you can also change the colors of the graphic kit, choose whether to receive it with glossy or matt lamination and to upload a maximum of seven logos.
We will choose the best position in which to place them (we will send you thought email a preview before printing) and the graphic kit will only be processed after your approval.
If you have any particular preference for the position of the logos, write them in the order “notes” that you will find at checkout that is the page where you will select the payment and shipping method.